Placas Mãe

Produto

Placa Mãe P4 S775 ABIT NI8-SLI SOM/SATA/GBLAN/DDR2(8xx DUAL CORE)

Descrição

CPU Support: Supports 90nm LGA775 processor package Supports Intel Pentium Processor Extreme Edition Supports Intel Pentium D Smithfield processors Supports Intel Pentium 4 / Pentium 4 Extreme Edition processors Intel Hyper-Threading Technology ready Chipset: NVIDIA nForce4 SLI Intel Edition SPP - 400 - 1066MHz front side bus - NVIDIA DualDDR2 Memory Controller - One x16 PCI Express link for graphics card. + Supports Scalable Link Interface Technology (SLI) for dual PCIe x8 interfaces - Supports up to four PCI Express x1 lanes NVIDIA nForce4 SLI Intel Edition MCP - Supports up to ten USB 2.0 ports - Supports four SATA II ports - Dual-channel Ultra ATA-133 IDE controller - Supports up to six PCI slots Memory : NVIDIA DualDDR2 architecture - 4 x 240-pin DIMM sockets support max. 4GB DDR2 400/533/667 non-ECC memory - Slot independant dual-channel mode - NVIDIA QuickSync - NVIDIA DASP 3.0 Storage: NVIDIA nForce4 SLI Intel Edition MCP - 4 x Ultra ATA 33/66/100/133 (data transfer rate up to 133MB/sec.) - 4 x SATA II (Serial ATA II 3.0Gbps interface) - NVIDIA MediaShield Technology - Supports RAID 0, RAID 1, RAID 0+1, RAID 5, JBOD - Supports RAID Morphing Silicon Image Sil3132 SATAIIRAID controller - 2 x SATA II (Serial ATAII 3.0Gbps interface) - Supports RAID 0, RAID 1 - Supports eSATA Audio: ABIT AudioMAX 7.1 - Realtek ALC850 8-channel audio CODEC - 8-Channel Audio I/O ports - Optical S/PDIF out Networking: NVIDIA Gigabit LAN co-supported by Vittesse VSC8201 PHY chip (Transceiver) I/O Interface: 1 x Floppy connector 2 x Ultra ATA IDE connectors 6 x SATA connectors 10 x USB 2.0 ports (4 x rear, 6 x header) 1 x RJ45 LAN port 1 x mini-DIN-6 PS/2 mouse port 1 x mini-DIN-6 PS/2 keyboard port Expansion Slots: 2 x PCIe x16 slots, PCI Express Bus specification v1.0a compliant 2 x PCIe x1 slots, PCI Express Bus specification v1.0a compliant 2 x 32-bit PCI slots, PCI 2.3 compliant Special Features: ABIT µGuru ABIT CPU ThermalGuard ABIT OC Strips PCB: ATX Form Factor, 12"x 9.6"(30.5cm x 24.4cm)